ValueCut USER MANUAL
3 The Control Panel
This chapter describes the button operations with the LCM menu flowcharts of ValueCut.
When the cutting plotter is ready for use as described in Chapter 1 & 2, all functions are
under default parameters.
3.1 The LCD Panel
MISC
Key
LCD Screen
Power LED
4 Arrow Keys
ENTER
PAUSE/RESUME
ON/OFF LINE
OFFSET
FORCE
SPEED
CUT TEST
DATA CLEAE
TOOL
MISC
V5a 2015 Jan
SPEED
FORCE
TOOL SELECT
DATA CLEAR
< LCD Control Panel on ValueCut series >
Function
To display functions and error messages.
To indicate the power status ( light up: power on; light off: power off )
To move position, select function, or change setting.
To set item or register the immediately preceding input value.
To temporarily halt cutting process or to continue
To switch modes, stop cutting job, or abort changes of settings.
To adjust the value of blade's offset.
To adjust the value of cutting force.
To adjust the value of cutting speed and quality.
To perform cutting tests in different ways.
To clear up buffer memory.
To select tools.
To set up functions.
POWER
OFFSET
ON/OFF
CUT TEST
LINE
35
PAUSE / RESUME
ENTER
Please see details "3.4 Menu Items"
Control Panel