Operation Panel - MUTOH SC-PRO User Manual

2.3.3

Operation panel

BASIC KEYS
1 MENU key
2 ENTER key
3 EXIT/CANCEL key
RESUME / PAUSE key
4
5 UP / YES key
6 DOWN / NO key
7 MEDIA TYPE key
8 ARROW key
DIRECT KEYS
9 SHEET OFF key
10 TEST key
11 ORIGIN key
12 CONTOUR CUTTING key
13 SPEED key
14 OFFSET key
15 FORCE key
16 TOOL key
LED's
17 SHEET LED
18 ROLL FRONT LED
19 ROLL LED
20 ORIGIN LED
21 CONTOUR CUTTING LED
To enter the main menu of the cutter
To open a menu item or to confirm a setting
To exit a menu item, to decline a setting or to cancel a cutting job.
To interrupt or resume a cutting job
This key has multiple functions
Browse through the main menu
o
Increase a value
o
Confirm a setting
o
This key has multiple functions
Browse through the main menu
o
Decrease a value
o
Decline a setting
o
To select the media type
Sheet media initialization: front – rear – left – right
o
Roll front media initialization: front – left – right
o
Roll media initialization: left - right
o
To move the media forwards and backwards
To move the cutter head to the left or right
To enter the sheet off mode
To enter the test menu
To enter the origin menu
To enter the contour cutting menu
To enter the speed menu
To enter the offset menu
To enter the force menu
To enter the tool menu
Lights up when selecting SHEET with the [MEDIA TYPE]-key.
Lights up when selecting ROLL FRONT with the [MEDIA TYPE]-key.
Lights up when selecting ROLL with the [MEDIA TYPE]-key.
Lights up when an origin is set by the user.
Blinks when you are busy setting the origin.
Light up while contour cutting.
Blinks when the cutter is measuring the reference box.
19
User's Guide SC-PRO Cutting Plotter
CHAPTER 2 : PRODUCT OVERVIEW
AP-75280 – Rev. 1.1