Software/Driver Installation; Pre-Requisites; Installation - Chelsio Communications Terminator Series Installation And User Manual
Unified wire for linux
Hide thumbs
Also See for Terminator Series:
- Installation and user manual (48 pages) ,
- Installation and user manual (54 pages) ,
- Installation and user manual (26 pages)
Table of Contents
Advertisement
Chapter IV. iWARP (RDMA)
Software/Driver Installation
2.1.
Pre-requisites
•
libnl-devel, libnl3-devel and valgrind-devel packages should be installed for libiwpm and
OFED installation.
•
If you are planning to upgrade OFED on one member of the cluster, the upgrade needs to
be installed on all the members.
•
If you want to install OFED with NFS-RDMA support, refer to
•
rdma-core-devel package should be installed on RHEL 7.4, RHEL 7.5, SLES15 and SLES
12 SP3 systems.
2.2.
Installation
i.
Change your current working directory to Chelsio Unified Wire package directory:
[root@host~]# cd ChelsioUwire-x.x.x.x
ii.
Install iWARP drivers and libraries:
[root@host~]# make iwarp_install
For more installation options, please run
Note
Chelsio Unified Wire for Linux
Setting up NFS-RDMA
make help
install.py -h
or
section.
85
Advertisement
Table of Contents
Need help?
Do you have a question about the Terminator Series and is the answer not in the manual?
Questions and answers