Hma - Chelsio Communications Terminator Series Installation And User Manual

Chapter XI. iSCSI PDU Offload Initiator
Example:
[root@host~]# iscsiadm -m node -T iqn.2004-05.com.chelsio.target1 -p
102.2.2.155:3260,1 -I cxgb4i.00:07:43:04:5b:da -l
If the login fails with an error message in the format of
big. Need to be <= <Y>
MaxRecvDataSegmentLength
for
node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192
Always take a backup of
Important
Wire Package. Although the file is saved to
the package using RPM, you are still advised to take a backup.
iv. Logging out from an iSCSI Target
Log out from an iSCSI Target by executing a command in the following format:
[root@host~]# iscsiadm -m node -T <iqn name of target> -p <target ip
address>:<target port no> -I <cxgb4i iface file name> -u
Example:
[root@host~]# iscsiadm -m node -T iqn.2004-05.com.chelsio.target1 -p
102.2.2.155:3260,1 -I cxgb4i.00:07:43:04:5b:da -u
Other options can be found by typing
Note
4.2.

HMA

To use HMA, please ensure that Unified Wire is installed using the Unified Wire (Default)
configuration tuning option.
Currently 256 IPv4/128 IPv6 iSCSI PDU Offload Initiator connections are supported on T6225-
SO-CR adapter. The following image shows the HMA reserved memory.
Chelsio Unified Wire for Linux
iscsi/iscsid.conf
. in dmesg, edit the
:
iscsid.conf
ERR! MaxRecvSegmentLength <X> too
file and change the setting
file before installing Chelsio Unified
iscsid.rpmsave
iscsiadm --help
after uninstalling
194