Chelsio Communications Terminator Series Installation And User Manual page 409

Chapter XXV. Unified Boot
RHEL 6.X Installation
i. Please make sure that the USB drive with DUD image is inserted. Press Tab and then type
dd at the boot prompt for the installation media. The dd option specifies that you will be
providing a Driver Update Disk during the installation.
ii. The installer will load and prompt you for the driver update disk. Select "Yes" and hit [Enter]
to proceed.
iii. You will be asked to select the Driver Update Disk device from a list. USB drives usually show
up as SCSI disks in Linux. So, if there are no other SCSI disks connected to the system, the
USB drive would assume the first drive letter "a". Hence the drive name would be "sda".
You can view the messages from the Linux kernel and drivers to determine the name of the
USB drive, by pressing [Alt] + [F3] or [Alt] + [F4]. Press [Alt] + [F1] to get back to the list.
Chelsio Unified Wire for Linux 409