Chelsio Communications Terminator Series Installation And User Manual page 35

Chapter I. Chelsio Unified Wire
vi. To install OFED and Chelsio drivers built against OFED, run the above command with -o
option.
[root@host~]# ./install.py –i <Installation mode> -c <Configuration> -o
vii. Reboot your machine for changes to take effect.
iWARP driver installation on cluster nodes
Please make sure that you have enabled password less authentication with ssh
Important
on the peer nodes for this feature to work.
i. Change your current working directory to Chelsio Unified Wire package directory:
[root@host~]# cd ChelsioUwire-x.x.x.x-<OS>-<arch>
ii. Create a file (machinefilename) containing the IP addresses or hostnames of the nodes in the
cluster. You can view the sample file, sample_machinefile, provided in the package to view
the format in which the nodes have to be listed.
iii. Now, execute the following command:
[root@host~]# ./install.py -C
<nic_toe/all/udpso/wd> -c <configuration_tuning> -o
Here, -o parameter will install OFED and Chelsio drivers built against OFED.
The above command will install iWARP (iw_cxgb4) and TOE (t4_tom) drivers on all the nodes
listed in the <machinefilename> file.
iv. Reboot your machine for changes to take effect.
Chelsio Unified Wire for Linux
-m <machinefilename> -i
35