Chelsio Communications Terminator Series Installation And User Manual page 34

Chapter I. Chelsio Unified Wire
CLI mode
i. Download the tarball specific to your operating system and architecture from
Download Center.
ii. Untar the tarball:
E.g., for RHEL 6.9, untar using the following command:
[root@host~]# tar zxvf ChelsioUwire-x.x.x.x-RHEL6.9_x86_64.tar.gz
iii. Change your current working directory to Chelsio Unified Wire package directory:
[root@host~]# cd ChelsioUwire-x.x.x.x-<OS>-<arch>
iv. Install Unified Wire:
[root@host~]# ./install.py -i <nic_toe/all/udpso/wd/crypto/ovs>
Here,
nic_toe : NIC and TOE drivers only
all : All Chelsio drivers built against inbox OFED
udpso : UDP segmentation offload capable NIC and TOE drivers only
wd : Wire Direct drivers and libraries only
crypto : Crypto drivers and Chelsio Openssl modules.
ovs : OVS modules and NIC driver.
The installation options may vary depending on the Linux distribution.
Note
v. The default configuration tuning option is Unified Wire. The configuration tuning can be
selected using the following command:
[root@host~]# ./install.py –i <Installation mode> -c <configuration_tuning>
To view the different configuration tuning options, view the help by typing
Note
[root@host~]# ./install.py –h
Chelsio Unified Wire for Linux
Chelsio
34