Chelsio Communications Terminator Series Installation And User Manual page 139

Chapter IX. LIO iSCSI Target Offload
d. Select Device Drivers
Infrastructure.
e. Enable Linux-iSCSI.org iSCSI Target Mode Stack as a Module (if not already
enabled).
f. Select Save.
g. Exit from the installation menu.
h. Continue with kernel installation as usual.
i. Boot into the new kernel and proceed with driver installation as directed in the
Software/Driver Installation section.
Kernel.org linux-4.9
i. Download the stable version of 4.9 from kernel.org.
ii. Untar the tar-ball.
iii. Change your working directory to kernel package directory and run the following command
to invoke the installation menu.
[root@host~]# make menuconfig
iv. Select Device Drivers > Generic Target Core Mod (TCM) and ConfigFS Infrastructure.
v. Enable Linux-iSCSI.org iSCSI Target Mode Stack.
vi. Select Save.
vii. Exit from the installation menu.
viii. Apply the patch provided in the Unified Wire package.
[root@host~]# patch -p1 <
/root/<driver_package>/src/cxgbit/patch/iscsi_target.patch
ix. Continue with kernel installation as usual.
x. Boot into the new kernel and proceed with driver installation as directed in the
Software/Driver Installation section.
Ubuntu 18.04.1
i. Clone Ubuntu Linux kernel source repository.
[root@host~]# git clone git://kernel.ubuntu.com/ubuntu/ubuntu-bionic.git
ii. Check the booted kernel version using uname -r
iii. Find the git tag which matches the kernel version.
[root@host~]# cd ubuntu-bionic/
[root@host~]# git tag -l Ubuntu-* | grep -i 4.15.0-29
Ubuntu-4.15.0-29.31
Chelsio Unified Wire for Linux
→
Generic Target Core Mod (TCM) and ConfigFS
139