Chelsio Communications Terminator Series Installation And User Manual page 361

Chapter XXV. Unified Boot
ix. Highlight Flash Utility and press [Enter].
x. Erase or update firmware using the methods explained below:
•
Erase existing firmware
a. Select [Erase] as Flash Operation
b. Select [FW File] as Flash File Type
c. Select Update/Erase
d. Press [Y] to confirm.
e. Reboot system.
•
Update firmware
a. Select [Update] as Flash Operation
b. Select [FW File] as Flash File Type
c. Enter full path to the firmware file for Enter File Name, e.g., CHELSIO\t6fw-
1.16.29.0.bin.
d. Press [Enter]
e. Select Update/Erase
f. Press [Y] to confirm.
g. Reboot system
Similarly, you can use the above method to update/erase Option ROM, Hardware Configuration
and Phy Firmware file.
Chelsio Unified Wire for Linux 361