Introduction; Hardware Requirements; Software Requirements - Chelsio Communications Terminator Series Installation And User Manual
Unified wire for linux
Hide thumbs
Also See for Terminator Series:
- Installation and user manual (48 pages) ,
- Installation and user manual (54 pages) ,
- Installation and user manual (26 pages)
Table of Contents
Advertisement
Chapter V. iSER
Introduction
The iSCSI Extensions for RDMA (iSER) protocol is a translation layer for operating iSCSI over
RDMA transports, such as iWARP/Ethernet or InfiniBand.
1.1.
Hardware Requirements
Supported adapters
The following are the currently shipping Chelsio adapters that are compatible with iSER driver:
T62100-CR
T62100-LP-CR
T6425-CR
T6225-CR
T6225-LL-CR
T6225-OCP^
T6225-SO-CR^
T580-CR
T580-LP-CR
T540-CR
T540-BT
T520-CR
T520-LL-CR
T520-BT
^ Memory-free; 256 IPv4/128 IPv6 offload connections supported.
1.2.
Software Requirements
Linux Requirements
Currently the iSER driver is available for the following versions:
RHEL 7.5, 3.10.0-862.el7
RHEL 7.5, 4.14.0-49.el7a.aarch64 (ARM64)
RHEL 7.4, 3.10.0-693.el7
SLES 15, 4.12.14-23-default
SLES 12 SP3, 4.4.73-5-default
Ubuntu 18.04.1, 4.15.0-29-generic
Kernel.org linux-4.14.67 (kernel compiled on RHEL 7.3 and above)
Kernel.org linux-4.9 (Minimum 4.9 kernel version supported is 4.9.13; kernel compiled on
RHEL 7.3 and above)
Other kernel versions have not been tested and are not guaranteed to work.
Chelsio Unified Wire for Linux
100
Advertisement
Table of Contents
Need help?
Do you have a question about the Terminator Series and is the answer not in the manual?
Questions and answers