Pxe Boot Process; Legacy Pxe Boot - Chelsio Communications Terminator Series Installation And User Manual
Unified wire for linux
Hide thumbs
Also See for Terminator Series:
- Installation and user manual (48 pages) ,
- Installation and user manual (54 pages) ,
- Installation and user manual (26 pages)
Table of Contents
Advertisement
Chapter XXV. Unified Boot
PXE Boot Process
Before proceeding, please ensure that the Chelsio CNA has been flashed with the provided
firmware and option ROM (See
5.1.
Legacy PXE Boot
i.
After configuring the PXE server, make sure the PXE server works. Then reboot the client
machine.
ii.
Press [Alt+C] when the message to configure Chelsio adapters appears on the screen.
iii. The configuration utility will appear as below:
iv. Choose the CNA on which you flashed the option ROM image. Hit [Enter].
v.
Enable the adapter BIOS using arrow keys if not already enabled. Hit [Enter].
Use the default values for Boot Mode, EDD and EBDA Relocation parameters,
Note
unless instructed otherwise.
Chelsio Unified Wire for Linux
Flashing Firmware and option
ROM).
369
Advertisement
Table of Contents
Need help?
Do you have a question about the Terminator Series and is the answer not in the manual?
Questions and answers