Kernel Configuration - Chelsio Communications Terminator Series Installation And User Manual

Chapter XII. Crypto Offload

Kernel Configuration

Kernel.org linux-4.14.67/4.9
i. Change your current working directory to Chelsio Unified Wire package directory:
[root@host~]# cd ChelsioUwire-x.x.x.x
ii. Install the 4.14.67 kernel with Crypto components enabled by default:
[root@host~]# make kernel_install
iii. Boot into the new kernel and proceed with driver installation as directed in the
Software/Driver Installation section.
If you wish to use a custom 4.9.X/4.14.X kernel, enable the following options in the
Note
kernel configuration file and then proceed with kernel installation:
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_DEFAULT_SECURITY_SELINUX=y
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_CRYPTO=y
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
Chelsio Unified Wire for Linux 200