Download Print this page

Creating Filesystem - Chelsio Communications Terminator Series Installation And User Manual

Unified wire for linux

Hide thumbs Also See for Terminator Series:

Table of Contents

Chapter XIV. FCoE Full Offload Initiator

Alternatively, the LUNs discovered by the Chelsio FCoE initiators can be accessed via easily-

identifiable 'udev' path device files like:

[root@host~]# ls /dev/disk/by-path/pci-0000:04:00.0-csio-fcoe

<local_wwpn>:<remote_wwpn>:<lun_wwn>

Creating Filesystem

Create an ext3 filesystem using the following command:

[root@host~]# mkfs.ext3 /dev/sdx

Chelsio Unified Wire for Linux

Do you have a question about the Terminator Series and is the answer not in the manual?

Terminator 6