Chelsio Communications Terminator Series Installation And User Manual page 31

Chapter I. Chelsio Unified Wire
iv. Install the drivers, tools and libraries using the following command:
[root@host~]# make install
v. The default configuration tuning option is Unified Wire. The configuration tuning can be
selected using the following commands:
[root@host~]# make CONF=<configuration_tuning>
[root@host~]# make CONF=<configuration_tuning> install
Steps (iii) and (iv) mentioned above will NOT install Crypto, DCB, WD-TOE,
Important
OVS, DPDK drivers, and benchmark tools. They will have to be installed
manually.
Please refer to section
them.
To view the different configuration tuning options, view help by typing
Note
[root@host~]# make help
vi. Reboot your machine for changes to take effect.
CLI mode (individual drivers)
You can also choose to install drivers/features individually. Provided here are steps to build and
install some of them. For the complete list, view help by running
Change your current working directory to Chelsio Unified Wire package directory:
[root@host~]# cd ChelsioUwire-x.x.x.x
▪
To build and install all drivers without IPv6 support:
[root@host~]# make ipv6_disable=1
[root@host~]# make ipv6_disable=1 install
Chelsio Unified Wire for Linux
CLI mode (individual drivers) for instructions on installing
make help.
31