Introduction; Hardware Requirements - Chelsio Communications Terminator Series Installation And User Manual

Chapter XX. Classification and Filtering

Introduction

Classification and Filtering feature enhances network security by controlling incoming traffic as
they pass through network interface based on source and destination addresses, protocol, source
and receiving ports, or the value of some status bits in the packet. This feature can be used in the
ingress path to:
•
Steer ingress packets that meet ACL (Access Control List) accept criteria to a particular
receive queue.
•
Switch (proxy) ingress packets that meet ACL accept criteria to an output port, with
optional header rewrite.
•
Drop ingress packets that meet ACL accept criteria.
1.1.

Hardware Requirements

Supported Adapters
The following are the currently shipping Chelsio adapters that are compatible with the
Classification and Filtering feature:
T62100-CR
T62100-LP-CR
T62100-SO-CR*
T61100-OCP*
T6425-CR
T6225-CR
T6225-LL-CR
T6225-OCP*
T6225-SO-CR*
T580-CR
T580-LP-CR
T580-SO-CR*
T580-OCP-SO*
T540-CR
T540-BT
T520-CR
T520-LL-CR
T520-SO-CR*
T520-OCP-SO*
T520-BT
T420-CR*
T440-CR*
T422-CR*
T420-SO-CR*
Chelsio Unified Wire for Linux 273