Software/Driver Loading; Co-Processor; Inline - Chelsio Communications Terminator Series Installation And User Manual

Chapter XII. Crypto Offload

Software/Driver Loading

Please ensure that all inbox drivers are unloaded before proceeding with
Important
unified wire drivers.
[root@host~]# rmmod csiostor cxgb4i cxgbit iw_cxgb4 chcr cxgb4vf cxgb4
libcxgbi libcxgb
4.1.

Co-processor

i. To load the Crypto Offload driver in Co-processor mode (chcr), run the following command:
[root@host~]# modprobe cxgb4
[root@host~]# modprobe chcr
ii. Bring up the Chelsio network interface:
[root@host~]# ifconfig ethX up
Where ethX is the Chelsio interface.
4.2.

Inline

i. To load the Crypto Offload driver in Inline mode, load the Network driver in TOE mode:
[root@host~]# modprobe t4_tom
ii. Bring up the Chelsio network interface:
[root@host~]# ifconfig ethX up
Where ethX is the Chelsio interface.
Chelsio Unified Wire for Linux 204