Uefi Iscsi Boot - Chelsio Communications Terminator Series Installation And User Manual

Unified wire for linux

Hide thumbs Also See for Terminator Series:

Table of Contents

Chapter XXV. Unified Boot

xxviii. Enter BIOS setup and choose iSCSI target LUN discovered via Chelsio adapter as the first

boot device.

xxix. Reboot and boot from the iSCSI Target LUN or install the required OS using PXE.

uEFI iSCSI Boot

Only uEFI v2.3.1, v2.4 and v2.5 supported.

Any other uEFI version is NOT SUPPORTED and may render your system

This section describes the method to perform iSCSI boot on uEFI platforms.

Reboot the system and go into BIOS setup.

Disable Secure Boot, if not already done.

iii. Select Chelsio T5/T6 and press [Enter]

Chelsio Unified Wire for Linux

Do you have a question about the Terminator Series and is the answer not in the manual?

Terminator 6