Chelsio Communications Terminator Series Installation And User Manual page 22

Chapter I. Chelsio Unified Wire
Physical function 6: for FCoE
Physical function 7: Currently not assigned
Once Unified Wire package is installed and loaded, examine the output of
is discovered. You should see a similar output:
The above outputs indicate the hardware configuration of the adapter as well as serial number.
Network device names for Chelsio's physical ports are assigned using the following
Note
convention: the port farthest from the motherboard will appear as the first network
interface. However, for T5 40G and T420-BT adapters, the association of physical
Ethernet ports and their corresponding network device names is opposite. For these
adapters, the port nearest to the motherboard will appear as the first network
interface.
Chelsio Unified Wire for Linux
dmesg to see if the card
22