Chelsio Communications Terminator Series Installation And User Manual page 49

Chapter I. Chelsio Unified Wire
CLI mode
i. Change your current working directory to Chelsio Unified Wire package directory:
[root@host~]# cd ChelsioUwire-x.x.x.x
ii. Uninstall using the following command:
[root@host~]# make uninstall
CLI mode (individual drivers/software)
You can also choose to uninstall drivers/software individually. Provided here are steps to uninstall
few of them. For the complete list, view help by running
Change your current working directory to Chelsio Unified Wire package directory:
[root@host~]# cd ChelsioUwire-x.x.x.x
▪
To uninstall NIC driver:
[root@host~]# make nic_uninstall
▪
To uninstall offload driver:
[root@host~]# make toe_uninstall
▪
To uninstall iWARP driver:
[root@host~]# make iwarp_uninstall
▪
To uninstall UDP Segmentation Offload driver:
[root@host~]# make udp_offload_uninstall
Chelsio Unified Wire for Linux
make help
49