Chelsio Communications Terminator Series Installation And User Manual page 405

Unified wire for linux

Hide thumbs Also See for Terminator Series:

Table of Contents

Chapter XXV. Unified Boot

iii. Insert a blank USB flash drive.

iv. Format the USB drive

[root@host~]# mkfs.vfat /dev/sda1

Depending on the distribution to be installed, copy the corresponding image file to the USB

stick. For example, execute the following command for SLES 12 sp3.

[root@host~]# dd if=/root/<driver_package>/Uboot/LinuxDUD/Chelsio-

DriverUpdateDisk-SLES12sp3-x86_64-x.xx.x.x.img of=/dev/sda1

Chelsio Unified Wire for Linux

Need help?

Do you have a question about the Terminator Series and is the answer not in the manual?

Terminator 6