Chelsio Communications Terminator Series Installation And User Manual page 342

Chapter XXIV. DPDK Driver
Examples
•
Running single Tx and Rx queue traffic
i. Configure Pktgen tool to use single Tx and Rx queue, mapping core 1 to Rx and core 2 to
Tx queue on port 0:
[root@host~]# pktgen -c f -n 4 -- -T -P -m "[1:2].0" –N
.
.
.
Pktgen created by Keith Wiles -- >>> Powered by Intel® DPDK <<<
- Ports 0-3 of 4
Systems, Inc. All rights reserved. Powered by Intel® DPDK
Flags:Port :
Link State :
Pkts/s Rx :
Tx :
MBits/s Rx/Tx :
Broadcast :
Multicast :
64 Bytes :
65-127 :
128-255 :
256-511 :
512-1023 :
1024-1518 :
Runts/Jumbos :
Errors Rx/Tx :
Total Rx Pkts :
Tx Pkts :
Rx MBs :
Tx MBs :
ARP/ICMP Pkts :
:
Tx Count/% Rate :
PktSize/Tx Burst:
Src/Dest Port :
Pkt Type:VLAN ID:
Dst IP Address :
Src IP Address :
Dst MAC Address :
Src MAC Address :
-- Pktgen Ver:2.8.5(DPDK-2.1.0) --------------------------------------------
Chelsio Unified Wire for Linux
** Main Page ** Copyright (c) <2010-2015>, Wind River
P-------------:0
<UP-10000-FD>
0
14880593
0/9999
0
0
0
0
0
0
0
0
0/0
0/0
0
175605364
0
118006
0/0
Forever/100%
64/32
1234/5678
IPv4/TCP:0001
192.168.1.1
192.168.0.1/24
00:00:00:00:00:00
00:07:43:29:3c:40
---TotalRate---
0
14880593
0/9999
342