Installation On Fcoe Lun - Chelsio Communications Terminator Series Installation And User Manual

Chapter XXV. Unified Boot
viii. Provide a valid NFS/FTP/HTTP/TFTP Server IP address to proceed.
ix. Provide a valid directory path to the operating system to be installed.
x. Proceed with the installation as usual.
9.2.

Installation on FCoE LUN

If you are installing using CD/DVD, please make sure that the USB drive with DUD image
is inserted. Also, change the boot priority to boot from CD/DVD in the BIOS setup.
i. Insert the OS installation disc into your CD/DVD ROM.
ii. On the Grub menu, choose Install or upgrade an existing system option if not
already selected.
iii. Type e and then dd at the boot prompt for RHEL 7.
iv. Load Chelsio Driver Update Disk depending on the Linux distribution
for RHEL 7.x)
If you are installing from a PXE server, please refer 8.1. Installation using Chelsio
DUD (Click here
After successfully loading Chelsio DUD, follow the procedure mentioned below to continue
installation, based on the distribution.
Chelsio Unified Wire for Linux
for RHEL 7.x) section to load Chelsio Driver Update Disk.
(Click here
417