Default Option Rom Settings - Chelsio Communications Terminator Series Installation And User Manual

Unified wire for linux

Hide thumbs Also See for Terminator Series:

Table of Contents

Chapter XXV. Unified Boot

Default Option ROM Settings

If you wish to restore option ROM settings to their default values, i.e., PXE enabled, iSCSI and

FCoE disabled, use any of the methods mentioned below:

Using Option ROM (boot level)

Boot system into Chelsio's Unified Boot Setup utility and press F8.

Boot system into uEFI mode and press F3.

Chelsio Unified Wire for Linux

Do you have a question about the Terminator Series and is the answer not in the manual?

Terminator 6