Chelsio Communications Terminator Series Installation And User Manual page 343

Chapter XXIV. DPDK Driver
ii. Set packet size to 64B on all ports
Pktgen> set all size 64
iii. Start Tx traffic on port 0
Pktgen> start 0
iv. Stop Tx traffic on port 0
Pktgen> stop 0
•
Running multiple Tx and Rx queue traffic
i. Configure Pktgen tool to use 4 Tx and Rx queues, mapping cores 1-4 to Rx and 5-8 to Tx
queues, on port 0:
[root@host~]# pktgen -c 3ff -n 4 -- -T -P -m "[1-4:5-8].0" –N
ii. Set packet size to 64B on all ports
Pktgen> set all size 64
iii. Start Tx traffic on port 0
Pktgen> start 0
iv. Stop Tx traffic on port 0
Pktgen> stop 0
•
Running Tx and Rx queue traffic in Jumbo mode
i. Configure Pktgen tool to use 4 Tx and Rx queues, mapping cores 1-4 to Rx and 5-8 to Tx
queues, on port 0 in Jumbo mode:
[root@host~]# pktgen -c 3ff -n 4 -- -T –J -P -m "[1-4:5-8].0" –N
Chelsio Unified Wire for Linux 343