Uefi - Chelsio Communications Terminator Series Installation And User Manual

Chapter XXV. Unified Boot
x. To configure the base MAC address (optional), use the below command:
C:\CHELSIO>cfut4 -d <idx> -um <Hex MAC Address>
Example:
C:\CHELSIO>cfut4 -d 0 -um 000743000123
3.3.

uEFI

i. Reboot the system and go into BIOS setup.
ii. Disable Secure Boot.
iii. Configure the system having Chelsio CNA to boot in uEFI mode.
For Supermicro systems, enable Network Stack as well before proceeding.
Note
Chelsio Unified Wire for Linux 356