Chelsio Communications Terminator Series Installation And User Manual page 27

Chapter I. Chelsio Unified Wire
x. Select the required performance tuning option.
a. Enable Binding IRQs to CPUs: Bind MSI-X interrupts to different CPUs and disable
IRQ balance daemon.
b. Retain IRQ balance daemon: Do not disable IRQ balance daemon.
c. TX-Coalasce: Write tx_coal=2 to modprobe.d/conf.
For more information on the Performance tuning options, please refer to
Note
Performance Tuning
xi. If you already have the required version of OFED software installed, select Skip-OFED. To
install OFED 4.8-2 choose the Install-OFED option.
This step will be prompted only for OFED supported platforms.
Note
xii. The selected components will now be installed:
Chelsio Unified Wire for Linux
section of the Network (NIC/TOE) chapter.
27