Chelsio Communications Terminator Series Installation And User Manual page 48

Chapter I. Chelsio Unified Wire
vii. Select "Yes" to exit the installer or "No" to go back.
Press Esc or Ctrl+C to exit the installer at any point of time.
Note
CLI mode (without Dialog utility)
i. Change your current working directory to Chelsio Unified Wire package directory:
[root@host~]# cd ChelsioUwire-x.x.x.x
ii. Run the following script with
[root@host~]# ./install.py –u <target>
View help by typing
Note
iWARP driver uninstallation on Cluster nodes
i. Change your current working directory to Chelsio Unified Wire package directory:
[root@host~]# cd ChelsioUwire-x.x.x.x
ii. Uninstall iWARP drivers on multiple Cluster nodes using:
[root@host~]# ./install.py -C -m <machinefilename> -u all
The above command will remove Chelsio iWARP (iw_cxgb4) and TOE (t4_tom) drivers from all
the nodes listed in the machinefilename file.
Chelsio Unified Wire for Linux
–u
option to uninstall the Unified Wire Package:
[root@host~]# ./install.py –h for more information
48