Chelsio Communications Terminator Series Installation And User Manual page 228

Chapter XIV. FCoE Full Offload Initiator
Verifying the target discovery
To view the list of targets discovered on a particular FCoE port, follow the below mentioned steps:
i. Determine the WWPN of the initiator local port under sysfs. The hosts under fc_host
depends on the number of ports on the adapter used.
[root@host~]# cat /sys/class/fc_host/hostX/port_name
ii. After finding the localport, go to the corresponding remote port under sysfs # cat
/sys/class/fc_remote_ports/rport-X:B:R where X is the Host ID, B is the bus ID and R is
the remote port.
Chelsio Unified Wire for Linux 228