Kernel Installation - Chelsio Communications Terminator Series Installation And User Manual

Unified wire for linux

Hide thumbs Also See for Terminator Series:

Table of Contents

Chapter V. iSER

Kernel Installation

Change your current working directory to Chelsio Unified Wire package directory:

[root@host~]# cd ChelsioUwire-x.x.x.x

ii. To install 4.14.67 kernel with iSER components enabled, use the following command:

[root@host~]# make kernel_install

If you wish to use custom 4.9.X/4.14.X kernel, enable the following iSER

parameters in the kernel configuration file and then proceed with kernel

installation

CONFIG_ISCSI_TARGET=m

CONFIG_INFINIBAND_ISER=m

CONFIG_INFINIBAND_ISERT=m

iii. Boot into the new kernel and install Chelsio Unified Wire.

Chelsio Unified Wire for Linux

Do you have a question about the Terminator Series and is the answer not in the manual?

Terminator 6