Chelsio Communications Terminator Series Installation And User Manual page 168

Chapter X. iSCSI PDU Offload Target
RegisteriSNS
Sample iSCSI Configuration File
Following is a sample configuration file. While using iSCSI node (target), irrelevant entity block
can be removed or commented.
#
# Chelsio iSCSI Global Settings
#
global:
iscsi_login_complete_time=300
iscsi_auth_order=CHAP
DISC_AuthMethod=None
DISC_Auth_CHAP_Policy=Oneway
DISC_Auth_CHAP_Target="target_id1":"target_secret1"
DISC_Auth_CHAP_Initiator="initiator_id1":"initiator_sec1"
#
# an iSCSI Target "iqn.2006-02.com.chelsio.diskarray.san1"
# being served by the portal group "5". Setup as a RAM Disk.
#
target:
TargetName=iqn.2006-02.com.chelsio.diskarray.san1
# lun 0: a ramdisk with default size of 16MB
TargetDevice=ramdisk,MEM
PortalGroup=5@192.0.2.178:3260
#
# an iSCSI Target "iqn.2005-8.com.chelsio:diskarrays.san.328"
# being served by the portal group "1" and "2"
#
target:
#
Chelsio Unified Wire for Linux
"Yes" "Yes"
"No"
0..N: only one value from 0 through
N
0~N: a range of values between 0
through N
ALL: all currently supported LUNs.
Multiple lists of LUN numbers are
allowed. When specifying the list
separate the LUN ranges by a
comma.
No To turn on or off exporting of target
information via iSNS
168