Software/Driver Configuration And Fine-Tuning; Configuring Lio Iscsi Target; Offloading Lio Iscsi Connection - Chelsio Communications Terminator Series Installation And User Manual

Chapter IX. LIO iSCSI Target Offload

Software/Driver Configuration and Fine-tuning

5.1.

Configuring LIO iSCSI Target

The LIO iSCSI Target
Please refer the user manual at
Sample Configuration
Here is a sample iSCSI configuration listing a target configured with 1 RAM disk LUN and ACL
not configured:
5.2.

Offloading LIO iSCSI Connection

To offload the LIO iSCSI Target use the following command:
[root@host~]# echo 1 >
/sys/kernel/config/target/iscsi/<target_iqn>/tpgt_1/np/<target_ip>\:3260/cxg
bit
Example:
Execute the above command for every portal address listening on Chelsio interface.
Chelsio Unified Wire for Linux
needs to be configured
http://www.linux-iscsi.org/Doc/LIO Admin Manual.pdf
before it can become useful.
to do so.
144