Flashing Firmware Configuration File - Chelsio Communications Terminator Series Installation And User Manual

Unified wire for linux

Hide thumbs Also See for Terminator Series:

Table of Contents

Chapter XXIV. DPDK Driver

Flashing Firmware Configuration File

If not done already, load the kernel mode NIC driver (cxgb4):

[root@host~]# modprobe cxgb4

ii. Flash the firmware configuration file (for T6 adapters):

[root@host~]# cxgbtool <iface> loadcfg /lib/firmware/cxgb4/t6-config.txt

For T5 adapters, use t5-config.txt.

Chelsio Unified Wire for Linux

Do you have a question about the Terminator Series and is the answer not in the manual?

Terminator 6