Hardware Requirements; Software Requirements - Chelsio Communications Terminator Series Installation And User Manual

Chapter XVII. UDP Segmentation Offload and Pacing
1.1.

Hardware Requirements

Supported Adapters
The following are the currently shipping Chelsio adapters that are compatible with the UDP
Segmentation Offload and Pacing driver:
T62100-CR
T62100-LP-CR
T6425-CR
T6225-CR
T6225-LL-CR
T580-CR
T580-LP-CR
T540-CR
T540-BT
T520-CR
T520-LL-CR
T520-BT
T420-CR
T440-CR
T422-CR
T404-BT
T420-BCH
T440-LP-CR
T420-BT
T420-LL-CR
T420-CX
1.2.

Software Requirements

Linux Requirements
Currently the UDP Segmentation Offload and Pacing driver is available for the following
versions:
RHEL 7.5, 3.10.0-862.el7
RHEL 7.4, 3.10.0-693.el7
RHEL 6.9, 2.6.32-696.el6
SLES 12 SP3, 4.4.73-5-default
SLES 12 SP2, 4.4.21-69-default
Ubuntu 16.04.4, 4.4.0-116-generic
Kernel.org linux-4.9 (Minimum 4.9 kernel version supported is 4.9.13)
Other kernel versions have not been tested and are not guaranteed to work.
Chelsio Unified Wire for Linux 251