Chelsio Communications Terminator Series Installation And User Manual page 117

Unified wire for linux

Hide thumbs Also See for Terminator Series:

Table of Contents

Chapter VI. WD-UDP

Then on r9, we run udptest to port 9000 to see the host stack UDP latency:

[root@r9 ~]# /usr/local/src/hpcbench/udp/udptest -r 5 -a -h 192.168.1.112 -p

Running the same test with libcxgb4_sock:

[root@r9 ~]# LD_PRELOAD=libcxgb4_sock.so /usr/local/src/hpcbench/udp/udptest

-r 5 -a -h 192.168.1.112 -p 9001

Determining if the application is being offloaded

To see if the application is being offloaded, open a window on one of the machines, and run

against the Chelsio interface. If you see minimal UDP output on the interface, then the

UDP traffic is being properly offloaded.

Chelsio Unified Wire for Linux

Need help?

Do you have a question about the Terminator Series and is the answer not in the manual?

Terminator 6