Allowing Unsupported Modules On Sles; Installing Chelsio Unified Wire From Source - Chelsio Communications Terminator Series Installation And User Manual

Chapter I. Chelsio Unified Wire
3.4.

Allowing unsupported modules on SLES

On SLES11 SPx platforms, edit the /etc/modprobe.d/unsupported-modules file and change
allow_unsupported_modules to 1.
On SLES12 SPx platforms, edit the /etc/modprobe.d/10-unsupported-modules.conf file and
change allow_unsupported_modules to 1.
3.5.

Installing Chelsio Unified Wire from source

GUI mode (with Dialog utility)
i. Download the Unified Wire driver package (tarball) from
ii. Untar the tarball using the following command:
[root@host~]# tar zxvf <driver_package>.tar.gz
iii. Change your current working directory to Chelsio Unified Wire package directory:
[root@host~]# cd ChelsioUwire-x.x.x.x
iv. Run the following script to start the GUI installer:
[root@host~]# ./install.py
v. If Dialog utility is present, you can skip to step (vi). If not, press 'y' to install it when the installer
prompts for input.
vi. Select "install" under "Choose an action"
Chelsio Unified Wire for Linux
Chelsio Download Center.
25