Chelsio Communications Terminator Series Installation And User Manual page 140

Chapter IX. LIO iSCSI Target Offload
iv. Check out to the changeset.
[root@host~]# git checkout Ubuntu-4.15.0-29.31
v. Proceed with driver installation as directed in the Software/Driver Installation section.
3.14.57
i. Download the kernel from kernel.org.
ii. Untar the tar-ball.
iii. Change your working directory to kernel directory and run the following command to invoke
the installation menu.
[root@host~]# make menuconfig
iv. Select Device Drivers
v. Enable Linux-iSCSI.org iSCSI Target Mode Stack as a Module (if not already enabled).
vi. Select Save.
vii. Exit from the installation menu.
viii. Untar the patch file:
[root@host~]# cp /root/<driver_package>/src/cxgbit/patch/linux_3-14.a .
[root@host~]# ar xvf linux_3-14.a
ix. Apply all the patches to kernel source one by one:
[root@host~]# patch -p1 < <file_name>.patch
x. Continue with kernel installation as usual.
xi. Reboot to the newly installed kernel. Verify by running uname -a command.
xii. Install LIO iSCSI target offload driver as mentioned in the next section.
Chelsio Unified Wire for Linux
→
Generic Target Core Mod (TCM) and ConfigFS Infrastructure.
140