Software/Driver Configuration And Fine-Tuning; Important Configurable Parameters - Chelsio Communications Terminator Series Installation And User Manual
Network driver for macos
Hide thumbs
Also See for Terminator Series:
- Installation and user manual (48 pages) ,
- Installation and user manual (54 pages) ,
- Installation and user manual (432 pages)
Table of Contents
Advertisement
Chapter 5. Software/Driver Configuration and Fine-tuning
5. Software/Driver Configuration and Fine-tuning
5.1.
Important Configurable Parameters
5.1.1. FEC
Chelsio T6 Unified Wire adapters support changing Forward Error Correction (FEC). The
current FEC settings can be viewed using:
host:root# sudo cxgbtool <cxgbX> fec
Below is a sample output on T6 25G port:
To set FEC:
host:root# sudo cxgbtool <cxgbX> fec <value>
Here value can be:
rs
: Reed-Solomon FEC
baser: Base-R/Reed-Solomon FEC
auto : Use standard FEC settings as specified by IEEE 802.3 interpretations of Cable
Transceiver Module parameters.
off
: Turn off FEC.
Example
Changing FEC from Reed-Solomon to Base-R/Reed-Solomon:
Chelsio Network Driver for macOS
17
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Terminator Series and is the answer not in the manual?
Questions and answers