Installing The Nokia Ip560 Appliance; Before You Begin; Rack-Mounting The Appliance - Nokia IP560 - Hard Disk Drive Based Installation Manual

2

Installing the Nokia IP560 Appliance

This chapter describes how to install the IP560 appliance. The following topic is discussed:

Before You Begin

Rack-Mounting the Appliance

Before You Begin
To rack-mount the appliance, you need:
Phillips-head screwdriver
Grounding wrist strap
Suitable, grounded work surface on which to place the chassis tray assembly
Caution
To help guard against electrostatic discharge damage, make sure you are properly
grounded by using a grounding wrist strap and following the instructions provided with
the wrist strap before you handle the components or open the appliance.
Rack-Mounting the Appliance
The Nokia IP560 security platform mounts in a standard 19-inch equipment rack with four
mounting screws, as
Note
To avoid damaging your equipment, Nokia recommends that you use all four rack-mounting
bolts when you install your appliance on the rack.
IP560 Security Platform Installation Guide
Figure 9 shows.
31