Etsi Cpe Safety Guidelines; Safety Instructions; Safety Instruction Boxes - Nokia 7368 ISAM CPE A-240Z-A Product Manual

Table of Contents

7368 ISAM CPE A-240Z-A Product Guide

2 ETSI CPE safety guidelines

This chapter provides information about the mandatory regulations that govern the

installation and operation of CPEs.

This section describes the safety instructions that are provided in the CPE customer

documentation and on the equipment.

2.1.1

The safety instruction boxes are provided in the CPE customer documentation.

Observe the instructions to meet safety requirements.

The following is an example of the Danger box.

The Danger box indicates that the described activity or situation may pose a threat

to personal safety. It calls attention to a situation or procedure which, if not correctly

performed or adhered to, may result in death or serious physical harm.

Do not proceed beyond a Danger box until the indicated conditions are fully

understood and met.

The following is an example of the Warning box.

The Warning box indicates that the described activity or situation may, or will, cause

equipment damage, loss of data, or serious performance problems. It identifies a

possible equipment-damaging situation or provides essential information to avoid the

degradation of system operations or data.

Do not proceed beyond a warning until the indicated conditions are fully understood

and met.

Issue: 01

All manuals and user guides at all-guides.com

Possibility of personal injury.

Danger —

Possibility of equipment damage.

Warning 1 —

Possibility of data loss.

Warning 2 —

3FE-46615-AAAA-TCZZA

ETSI CPE safety guidelines

Table of Contents