Declarations Of Conformity - Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual

22
General notes
Have the vehicle checked and repaired
#
immediately at a qualified specialist
workshop.
or
If driving safety is impaired while con‐
#
tinuing your journey, pull over and stop
the vehicle immediately in accordance
with the traffic conditions, and contact
a qualified specialist workshop.

Declarations of conformity

Electromagnetic compatibility
The electromagnetic compatibility of the vehicle
components has been checked and certified
according to the currently valid version of Regula‐
tion UN-R 10.
Wireless vehicle components
The following information is valid for all wireless
components in the vehicle as well as the informa‐
tion systems and communication devices integra‐
ted in the vehicle:
This vehicle's wireless components meet the
basic requirements and other relevant regulations
stipulated in guideline 2014/53/EU. Further
information is available from any Mercedes-Benz
service centre.
Jack
Hydraulic jack declaration of conformity
Copy and translation of the original declaration of
conformity:
EC declaration of conformity 2006/42/EC
We, WEBER-HYDRAULIK GMBH, Heilbronner Str.
30, 74363 Güglingen, hereby declare that the
product "Weber-Hydraulik hydraulic bottle jack",
types:
A AD ADX AH AHX AL AT ATD ATDX ATG ATN
ATGX ATPX ATQ AX
Capacity: 2,000 to 100,000 kg
Serial no.: from year of manufacture 01/2010
conforms to the relevant basic health and safety
requirements of the EC Machinery Directive.
This EC declaration of conformity becomes inva‐
lid:
in the event of modifications or repairs per‐
R
formed by an unqualified person
if the products are not used correctly and in
R
accordance with the Operating Instructions
if the checks to be performed regularly are
R
not carried out.
Relevant EU Directives: EC Machinery Directive
2006/42/EC
Applicable standards: ISO 11530
Quality assurance: DIN EN ISO 9001:2000
Güglingen, 01/07/2013
Signed by
Manager, WEBER-HYDRAULIK GmbH
Representative for technical documentation,
WEBER-HYDRAULIK GMBH
Heilbronner Straße 30, 74363 Güglingen
Mechanical jack declaration of conformity
Copy and translation of the original declaration of
conformity:
EC declaration of conformity
1.
The signatory, as a representative
Manufacturer:
BRANO a.s.
74741 Hradec nad Moravicí, Opavská 1000,
Czech Republic
ID no.: 64-387-5933
VAT ID no.: CZ64-387-5933
hereby declare under our sole responsibility that
the product:
2. a)
Description:
Jack
Type, number:
A 910 580 00 00
Year of manufacture: 2017
Fulfils all relevant conditions
Directive no. 2006/42/EC
b)
Description and intended use:
The jack is intended only for raising the specified
vehicle according to the instructions affixed to
the jack.
Technical documentation for the product is held
by the manufacturer. Representative for compil‐
ing technical documentation: director of the tech‐
nical department at Brano a.s.