Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 51

Press button 1 or pull outside handle 2.
#
The sliding door opens or closes.
Press button 1 again or pull outside handle
#
2.
The sliding door stops moving.
Unlocking the electric sliding door manually
If there has been a malfunction or if the battery
has been disconnected, you can use release
catch 2 to disconnect the sliding door from the
electric motor. Then, you can open or close the
door manually.
Vehicles with complete sliding door trim:
#
remove the cover from release catch 2.
Service operation is accessible.
To disconnect the sliding door from the
#
electric motor: insert the key into opening
1 of release catch
tion.
Turn the key 180° clockwise. The "MAN" posi‐
#
tion is set.
Open or close the sliding door with the out‐
#
side/inside door handle.
To connect the sliding door to the electric
#
motor: insert the key into opening
release catch 2 in the "MAN" position.
Turn the key 180° anti-clockwise.
#
The "AUTO" position is set.
Adjust the sliding door (
#
If it is not possible to rectify the malfunction:
Visit a qualified specialist workshop.
#
Opening and closing
2 into the "AUTO" posi‐
1 of
page 50).
→
49