Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 109

Problem
FAIL
FAIL¯
Auxiliary warm-air heater
Timer overview
1
Select option/change values
2
Menu bar
3
Select option
4
Press briefly to select or confirm a setting/
press and hold to switch immediate heating
mode on/off
5
Status bar
6
Press briefly to switch on the timer/cancel or
terminate the settings in a menu; press and
hold to terminate all functions
Setting the timer
Press the 6 button.
#
%
The timer will switch to standby mode after
ten seconds. The display will go off.
Possible causes/consequences and
Change your position in relation to the vehicle, moving closer if nec‐
#
essary.
The starter battery is not sufficiently charged.
Charge the starter battery.
#
The fuel tank is not filled up to the reserve level.
Refuel at the nearest filling station.
#
Stationary heating is malfunctioning.
Have stationary heating checked in a qualified specialist workshop.
#
Solutions
M
Setting the timer
Setting the time
You must reset the day, time and default value for
the operating duration in the following cases:
initial operation
R
after a voltage supply interruption (e.g.if the
R
battery has been disconnected)
after a malfunction
R
Press button 1 or
#
the menu bar 2.
Press the 4 button.
#
Press button 1 or
#
Press the 4 button.
#
Set the hour with button
#
Press the 4 button.
#
Set the minutes with button
#
Press the 4 button.
#
Setting the time format
Press button 1 or
#
the menu bar 2.
4
Press the button.
#
Press button 1 or
#
the time format flashes.
Press the 4 button.
#
Select the desired time format using button
#
1 or 3.
Press the 4 button.
#
Setting the day
Press button 1 or
#
the menu bar 2.
Press the 4 button.
#
107
Climate control
3 until 4 flashes on
3 until Î flashes.
1 or 3.
1 or 3.
3 until 4 flashes on
3 until the symbol for
3 until 4 flashes on