Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 223

Showing a stored route on the map
Requirements:
A USB device with stored routes is connected
R
with the multimedia system.
The route is stored in the "Routes" folder with
R
the GPS Exchange format (.gpx).
Multimedia system:
© Navigation
, .
tion) ª Where to?
.
Select a route with r or : .
#
Select Display on map.
#
Move the map ( page 229).
→
#
Starting a saved route
Requirements:
A USB device with stored routes is connected
R
with the multimedia system.
The route is stored in the "Routes" folder with
R
the GPS Exchange format (.gpx).
Multimedia system:
© Navigation
, .
tion) ª Where to?
.
Select a route.
#
Select Start route guidance from the begin-
#
ning or Start route guidance from current
location.
Route guidance starts.
%
The route can be saved with f in the
menu ( page 216).
→
Recording a route
Requirements:
A USB device is connected with the multime‐
R
dia system.
Multimedia system:
© Navigation
, .
tion) ª Where to?
.
To start recording: select
#
new route.
A red recording symbol is shown.
The route is stored on the USB device.
To stop recording: select
#
Saving a recorded route
Requirements:
A USB device is connected with the multime‐
R
dia system.
(Naviga‐
Stored routes
.
(Naviga‐
Stored routes
.
(Naviga‐
Stored routes
.
Start to record
End recording.
MBUX multimedia system
Multimedia system:
© Navigation
, .
tion) ª Where to?
.
Select a route.
#
Select f.
#
Select Store in "Previous
#
The route is stored in the "Previous destina‐
tions" memory and can be called up from
there for route guidance.
Editing a stored route
Requirements:
A USB device with stored routes is connected
R
with the multimedia system (
Multimedia system:
© Navigation
, .
tion) ª Where to?
.
Select a route with :.
#
To enter a name: select
#
Enter the name.
#
Select OK.
#
or
When the name has been changed, press the
#
% button.
Select Yes.
#
To delete a route: select Delete.
#
Select Yes.
#
Route guidance
Notes on route guidance
& WARNING Risk of distraction from oper‐
ating integrated communication equip‐
ment while the vehicle is in motion
If you operate communication equipment
integrated in the vehicle when driving, you
will be distracted from the traffic situation.
This could also cause you to lose control of
the vehicle.
Only operate this equipment when the
#
traffic situation permits.
If you cannot be sure of this, stop the
#
vehicle whilst paying attention to road
and traffic conditions and operate the
equipment with the vehicle stationary.
221
(Naviga‐
Stored routes
.
destinations".
page 257).
→
(Naviga‐
Stored routes
.
Change name.