Ary Heater - Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual

Yellow: departure time has been pre-selec‐
R
ted.
Auxiliary heating or ventilation switches off after
a maximum of 50 minutes.
Switching heater booster mode on/off
To switch on: start the engine.
#
Press the & button.
#
To switch off: press the & button.
#
Heater booster mode is switched on at an
outside temperature of less than 0 °C when
necessary.
%
Heater booster mode is available only for
vehicles with hot-water auxiliary heaters.
Adjusting the hot water auxiliary heater by
remote control
Requirements:
The fuel tank has been filled above the
R
reserve fuel level.
Switching on immediately
Press and hold the u button until the
#
message appears on the remote control's dis‐
play.
Setting the departure time
Briefly press the u button.
#
Continue to press the , or . button
#
until the time to be changed appears on the
display.
Press the u and ^ buttons simultane‐
#
ously.
The Î symbol on the remote control display
will flash.
Set the required departure time with the
#
, and . buttons.
Press the u and ^ buttons simultane‐
#
ously.
The new departure time will be saved.
Up to three departure times can be saved.
To activate the departure time: briefly
#
press the u button.
Select the required departure time with the
#
, and . buttons.
Press and hold the u button.
#
The Í symbol, the departure time and,
depending on the selected departure time,
letter A, B or C will appear on the remote
control's display.
To deactivate the departure time: select
#
the required departure time and press and
hold the ^ button.
OFF will appear on the display.
To check the status of the active station‐
#
ary heater: briefly press the u button.
Switching off immediately
Press and hold the ^ button.
#
Overview of remote control displays (station‐
ary heating/ventilation)
ON
1
Stationary ventilation switched on
2
Stationary heating switched on
3
Selected departure time
4
Remaining stationary heating or ventilation
time (in minutes)
5
Stationary heating or ventilation active
6
Departure time activated
7
Signal strength
Further display options:
Time: The selected departure time.
R
105
Climate control