Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 166

Table of Contents

Advertisement

164
Driving and parking
Setting the type of warning
Select
Visual &
audible,
#
Setting the warning threshold
This value determines at which point the warning
is given once a speed limit is exceeded.
Select
Warning
threshold.
#
Set a speed.
#
Blind Spot Assist
Function of Blind Spot Assist with exit warn‐
ing
Blind Spot Assist uses two lateral, rear-facing
radar sensors to monitor the area directly next to
and on the side behind the vehicle.
& WARNING Risk of accident despite Blind
Spot Assist
Blind Spot Assist reacts neither to stationary
objects nor to vehicles approaching and over‐
taking you at a greatly different speed.
As a result, Blind Spot Assist cannot warn
drivers in these situations.
Always pay careful attention to the traf‐
#
fic situation and maintain a safe dis‐
tance at the side of the vehicle.
Blind Spot Assist is only an aid. It may fail to
detect some vehicles and is no substitute for
attentive driving. Always ensure that there is suf‐
ficient distance to the side for other road users
and obstacles.
If a vehicle is detected above speeds of approx‐
imately 12 km/h and this vehicle subsequently
enters the monitoring range directly next to your
vehicle, the warning lamp in the outside mirror
lights up red.
%
When a trailer is connected, the radar sen‐
sor's field of vision may be impaired, thereby
making limited monitoring possible. Always
pay careful attention to the traffic situation
and maintain a safe distance at the side of
the vehicle.
If a vehicle is detected close to your vehicle in the
lateral monitoring range and you switch on the
turn signal indicator in the corresponding direc‐
tion, a warning tone sounds. The red warning
lamp in the outside mirror flashes. If the turn sig‐
nal indicator remains switched on, all other
detected vehicles are indicated only by the flash‐
ing of the red warning lamp.
Visual
or None.
If you overtake a vehicle quickly, no warning is
given.
Exit warning
The exit warning is an additional function of Blind
Spot Assist and warns vehicle occupants when
leaving the vehicle about any approaching vehi‐
cles.
& WARNING Risk of accident despite exit
warning
The exit warning reacts neither to stationary
objects nor to vehicles approaching you at a
greatly different speed.
As a result, the exit warning cannot warn driv‐
ers in these situations.
Always pay particular attention to the
#
traffic situation when opening the doors
and make sure there is sufficient clear‐
ance.
%
An exit warning is not issued for sliding doors
and rear-end doors.
Overview
When the vehicle is
stationary, an object
is detected from
behind in the monitor‐
ing range.
When the vehicle is
stationary, a door on
the relevant side of
the vehicle is opened.
An object which is
close to your vehicle
is detected in the
monitoring range.
%
This additional function is only available when
Blind Spot Assist is activated and up to a
maximum of three minutes after the ignition
has been switched off. The end of the availa‐
bility of the exit warning function is indicated
by a series of flashes in the outside mirror.
The exit warning function is only an aid and is no
substitute for the attentiveness of the vehicle
occupants. Responsibility always lies with the
vehicle occupants when opening doors and leav‐
ing the vehicle.
Display in outside mir‐
ror
Visual and audible
warning

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents