Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 37

Check regularly that the permissible gross mass
of the child plus the child restraint system is not
exceeded.
When fitting a child restraint system, be sure to
observe the manufacturer's installation and oper‐
ating instructions as well as the correct use of
the child restraint system and the suitability of
the seats.
1
ISOFIX mounting brackets
Before every trip, make sure that the ISOFIX child
restraint system is engaged correctly in both ISO‐
FIX mounting brackets in the vehicle.
* NOTE Damage to the seat belt for the
centre seat
When fitting a child restraint system, the seat
belt for the centre seat could be damaged.
Make sure that the seat belt is not trap‐
#
ped.
Install the ISOFIX child restraint system on
#
both of the vehicle's mounting brackets.
Securing Top Tether
& WARNING Risk of injury due to incorrect
attachment of the Top Tether belt
If you attach the Top Tether belt incorrectly,
e.g. on an eyelet in the load compartment,
the child restraint system will not have been
secured correctly.
In an accident, it will therefore be unable to
provide the intended level of protection.
Only ever attach the Top Tether hook to
#
the designated Top Tether anchorage.
The risk of injury can be reduced by Top Tether.
The Top Tether belt facilitates an additional con‐
nection between the child restraint system
attached with ISOFIX and the vehicle.
The child restraint system must be equipped with
a Top Tether belt.
The Top Tether anchorages
back of the rear bench seat on the bench seat
legs.
If necessary, move the head restraint
#
upwards ( page 71).
→
Fit the ISOFIX child restraint system with Top
#
Tether. Always comply with the child restraint
system manufacturer's installation instruc‐
tions when doing so.
Guide Top Tether belt
#
restraint between the two head restraint bars.
Hook Top Tether hook
#
into Top Tether anchorage 1.
Tension Top Tether belt 3. Always comply
#
with the child restraint system manufacturer's
installation instructions when doing so.
35
Occupant safety
1 are located on the
3 under the head
2 without twisting