Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 270

268
Transporting
You can use the interior roof rack system to
secure loads. It is also suitable for securing long
loads.
%
The interior roof rack system may be subjec‐
ted to a load of 50 kg.
The interior roof rack system consists of the fol‐
lowing components:
Roof rails 1, which are attached to the roof
R
of the vehicle.
Rack rails 2, which are screwed onto the
R
roof rails and can be moved.
Rack rail 2 is equipped with sliding rail pair
R
4. Sliding rail pair
strap 5 can be moved. Load
placing and lashing it in belt strap 4.
The load can also be secured using head lash‐
R
ing 3.
4 with attached belt
6 is stowed by
To move the rack rails: unscrew star knob
#
nuts 2 anti-clockwise until they are slightly
loose.
Slide rack rail 1 along roof rail
#
desired position.
Screw star knob nuts
#
Check that the rack rail is seated securely.
#
To move the sliding rails: pull carabiner
#
of sliding rail 1 down and simultaneously
slide sliding rail 1
Release the carabiner at the desired position.
#
The sliding rail locks automatically.
3 to the
2
tight clockwise.
2
to the desired position.