Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 224

222
MBUX multimedia system
You must observe the legal requirements for the
country in which you are currently driving when
operating the multimedia system.
Route guidance begins once a route has been cal‐
culated.
The road and traffic rules and regulations always
have priority over multimedia system driving
instructions.
Driving instructions are:
Navigation announcements
R
Route guidance displays
R
Lane recommendations
R
If you do not follow the driving instructions or if
you leave the calculated route, a new route is cal‐
culated automatically.
Driving instructions may differ from the actual
road and traffic conditions if:
The route is diverted
R
The direction of a one-way street has been
R
changed
For this reason, you must always observe road
and traffic rules and regulations during your jour‐
ney.
The route may differ from the ideal route due to
the following:
Roadworks
R
Incomplete digital map data
R
Changing direction overview
Changes of direction are shown in the following
displays:
Detailed image of the junction
R
The display appears when you drive into a
junction.
3D image
R
The display appears when driving on junction-
free, multi-lane roads, for example on motor‐
way exits and motorway interchanges.
Example: 3D image of the upcoming change of
direction
1
Changing direction
2
Manoeuvre point, above this the current dis‐
tance to the change of direction
3
Current vehicle position
There are three phases when changing direction:
Preparation phase
R
If there is enough time between the changes
of direction, the multimedia system prepares
you for the upcoming change of direction. A
navigation announcement, e.g. "Prepare to
turn right", is issued.
The map appears in full-screen mode.
The status line shows: the direction informa‐
tion or the name of the road which is to be
turned into and the distance to the change of
direction.
Announcement phase
R
The multimedia system announces the
upcoming change of direction, e.g. by
announcing "Turn right in 100 m".
The display is split into two parts. The map is
displayed on the left; on the right, there is a
detailed image of the junction or a 3D image
of the upcoming change of direction.
Change-of-direction phase
R
The multimedia system announces the immi‐
nent change of direction, e.g. by announcing
"Now turn right".
The display is split into two parts.
The change of direction takes place when the
distance to manoeuvre point
with 0 m and the symbol for vehicle position
3 has reached manoeuvre point 2.
When the change of direction is complete, the
map appears in full-screen mode.
%
Changes of direction are also shown in the
Instrument Display.
2 is shown