Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 93

Switch off the lighting system.
#
Place a screwdriver, for example, at the open‐
#
ing 2 and carefully lever off the lamp lens
1.
Remove the bulb from the socket.
#
Insert the new bulb into the socket.
#
Position the lamp lens and clip it in so that it
#
engages.
Replacing rear light bulbs (chassis)
Overview of rear bulb types (chassis)
You can change the following bulbs.
Vehicles with standard tail lamps
1
Clearance lamp: R 5 W
2
Tail light: R 5 W
3
Brake light: P 21 W
4
Indicators: PY 21 W
5
Reversing lights: P 21 W
6
Rear fog light (driver's side): P 21 W
7
Licence plate lighting: R 5 W
Tail lamp (chassis)
Requirements:
Clearance lamp: bulb type R 5 W
R
Indicators: bulb type PY 21 W
R
Brake light: bulb type P 21 W
R
Taillight: bulb type R 5 W
R
Rear fog lights: bulb type P 21 W
R
License plate lighting: bulb type R 5 W
R
Reversing lights: bulb type P 21 W
R
1
Light lens
2
Screws
3
Clearance lamp
4
Indicator
5
Brake light
6
Taillight
7
Rear fog light
8
Licence plate lighting
9
Reversing light
Switch off the lighting system.
#
Unscrew the screws
#
lens 2.
Remove the plug connector from the lamp
#
carrier.
Gently turn the bulb anti-clockwise and take it
#
out of the socket.
Insert the new bulb into the socket and turn it
#
clockwise.
Position the light lens
#
screws 1.
91
Light and vision
1 and remove the light
2 and tighten the