Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 102

100
Climate control
Adjusting the rear-compartment climate con‐
trol
Requirements:
The climate control system has been
R
switched on ( page 99).
→
Switching on the temperature and airflow
and adjusting TEMPMATIC and
THERMOTRONIC
Press the Y button.
#
The indicator lamp on the Y button and
the Y symbol on the climate control sys‐
tem display flash.
The display switches to the temperature and
the blower in the rear menu.
Use rocker switches w and K to set
#
the required temperature and airflow on the
rear-compartment menu.
%
If there are significant differences between
the temperature settings of the front and rear
systems, these cannot be controlled accu‐
rately.
% If the rear-compartment climate control has
been switched off, you can switch it on auto‐
matically by pressing the 0 button.
Depending on the vehicle equipment, climate
control switches on the overhead air-conditioning
system or rear-compartment heating as required:
Vehicles with an overhead air-condition‐
R
ing system: the rear compartment can be
cooled only.
Vehicles with rear-compartment heating:
R
the rear compartment can be heated only.
Switching off TEMPMATIC and
THERMOTRONIC rear-compartment climate
control
Press the Y button.
#
If the indicator lamp on the Y button and
#
the Y symbol on the climate control sys‐
tem display flash, set the airflow to 0 on the
rear-compartment menu.
%
Indicator lamp on: rear-compartment climate
control has been switched on.
Indicator lamp off: rear-compartment climate
control has been switched off.
Indicator lamp flashes: the setting mode of
the rear-compartment climate control is
active.
Switching the A/C function on and off
Requirements:
The climate control system is switched on.
R
( page 99)
→
The A/C function controls the climate and dries
the air inside the vehicle.
Press the ¿ button.
#
% Switch the A/C function off only temporarily.
Otherwise, the windows may mist up more
quickly.
% Condensation may leak from the underside of
the vehicle in cooling mode. This is not a sign
of a defect.
Automatically regulating climate control
Requirements:
The climate control system is switched on.
R
( page 99)
→
Switching on automatic climate control
In automatic mode, the temperature, airflow and
air distribution are regulated and kept constant.
Press the à button.
#
The temperature is shown on the display. The
airflow and air distribution disappear from the
display.
If the rear-compartment climate control has
been switched on, the setting for the rear is
carried over.
Switching off automatic climate control
Use the rocker switch K to change the air‐
#
flow setting and air distribution
( page 101) .
→
The other setting remains unaffected by the
change.
Automatically controlling the climate control
in the rear
Requirements:
Rear-compartment climate control has been
R
switched on ( page 100).
→
In automatic mode, the temperature, airflow and
air distribution are regulated and kept constant.
Press the Y button.
#
Press the à button.
#